Ask Experts Questions for FREE Help !
Ask
    LAhansen's Avatar
    LAhansen Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 16, 2015, 11:30 AM
    Luxaire gas furnace
    I have an older furnace... multi-position model 40-130... I think 1999 to early 2000's it's a new install and I need to convert to propane... there is a conversion kit but NO instructions and my installer says without the instructions... it seems the kit doesn't fit and I cannot find a number anywhere for assistance... HELP! Frozen in Maine!
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 16, 2015, 04:32 PM
    The only thing I had to do to mine, an older Goodman, was to change the jets, 4 of them and invert the small slug in the gas valve, under the black cap. One side is marked L, the other N.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Luxaire Gas Furnace [ 0 Answers ]

When the thermostat is turned on to heat the pilot ignites and stays lit for 10-15 seconds then turns off. It continues to ignite and repeat itself and the burners will never ignite. The heat sensor (white rodgers 3049-115) was replaced with a new one and it does the same thing pilot ignites and...

Luxaire furnace gas valves [ 0 Answers ]

Hi Guys, I have an older Luxair furnace that has a sticky gas valve or something. The pilot works fine but the tubes won't ignite. I gently bang on the valve with a hammer and the furnace takes off and runs fine for a couple days. Is there any way that I can maintenance the gas valve to extend its...

Luxaire gas furnace not working. [ 1 Answers ]

I noticed two days ago that my furnace was running but the house seemed to be getting cold. I checked the thermostat and sure enough it was 60 degrees, when it was set to be at 71. I turned the furnace off, turned the gas off, and then relit it and it turned back on. Worked fine for awhile and then...

Luxaire gas furnace [ 3 Answers ]

I have a luxaire gas furnace model number G8T08012UHA11A. The igniter would not ignite so I replaced it with a norton igniter 02532625000 model 271n 0734. Still would not ignite. I can hear the gas come on and you can light it with a match. How can I test to make sure I got a good igniter and...

Luxaire High Eficiency Gas furnace Pilot goes off [ 8 Answers ]

Hello Experts, I am a new member of this group from New Jersey. I have a Luxaire Gas Furnace about 12 years old. Today all of sudden cold air was coming through the ducts. Blower was on but no flame I saw then turned off the blower and turned on again Pilot came on so did the...

View more questions Search