 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Luxaire Gas Furnace
When the thermostat is turned on to heat the pilot ignites and stays lit for 10-15 seconds then turns off. It continues to ignite and repeat itself and the burners will never ignite. The heat sensor (white rodgers 3049-115) was replaced with a new one and it does the same thing pilot ignites and burners don't. Tested the output of heat sensor to the gas valve with a multimeter and it does switch from 0v to 24v when the heat is active. That is about as far as I can go with this, what next?? Any help appreciated Thanks.
|
||||
Check out some similar questions!
Hi Guys, I have an older Luxair furnace that has a sticky gas valve or something. The pilot works fine but the tubes won't ignite. I gently bang on the valve with a hammer and the furnace takes off and runs fine for a couple days. Is there any way that I can maintenance the gas valve to extend its...
I noticed two days ago that my furnace was running but the house seemed to be getting cold. I checked the thermostat and sure enough it was 60 degrees, when it was set to be at 71. I turned the furnace off, turned the gas off, and then relit it and it turned back on. Worked fine for awhile and then...
I have a luxaire gas furnace model number G8T08012UHA11A. The igniter would not ignite so I replaced it with a norton igniter 02532625000 model 271n 0734. Still would not ignite. I can hear the gas come on and you can light it with a match. How can I test to make sure I got a good igniter and...
Hello Experts, I am a new member of this group from New Jersey. I have a Luxaire Gas Furnace about 12 years old. Today all of sudden cold air was coming through the ducts. Blower was on but no flame I saw then turned off the blower and turned on again Pilot came on so did the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
