 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Luxaire furnace gas valves
Hi Guys, I have an older Luxair furnace that has a sticky gas valve or something. The pilot works fine but the tubes won't ignite. I gently bang on the valve with a hammer and the furnace takes off and runs fine for a couple days. Is there any way that I can maintenance the gas valve to extend its life?
|
||||
Check out some similar questions!
Gas furnace doesn't come on the fan for fresh air/exhaust and pilot light comes on but gas valve not letting gas in to burner so it doesn't light,but if I turn off power and back on three or four times it will work until house cools and need heat again
I noticed two days ago that my furnace was running but the house seemed to be getting cold. I checked the thermostat and sure enough it was 60 degrees, when it was set to be at 71. I turned the furnace off, turned the gas off, and then relit it and it turned back on. Worked fine for awhile and then...
I have a luxaire gas furnace model number G8T08012UHA11A. The igniter would not ignite so I replaced it with a norton igniter 02532625000 model 271n 0734. Still would not ignite. I can hear the gas come on and you can light it with a match. How can I test to make sure I got a good igniter and...
Our furnace at our second home runs the fan but no heat comes out. This does not happen all the time. Can be a problem because we are not here all the time
My furnace cuts in and out far too often and my furnace will cut in and blow nothing but cold air. The red trouble shooting light flashes 8 times meaning "lockout caused by loss of flame" Any ideas why either of these situations happen?:confused: I have put in a new flame sensor as well as a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
