Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Symmons or Harden shower valve help
[ 8 Answers ]
I live in a condo that was built around 1989. After the HOA replaced the shut off valves for my unit I noticed a problem with the shower valve in my second bathroom. Hot water does not come out. Hot water works fine from every other faucet, but when I turn the shower valve to hot the water slows to...
Has anyone ever seen this type of tub faucet valve?
[ 1 Answers ]
I can't figure out what brand this is and I don't have the paperwork from the remodel. The top lever switches tub to bath, the middle is the temp regulator, and the bottom is the drain plug. cj4rbw6161acs
Has anyone ever seen this type of tub faucet valve?
[ 1 Answers ]
I can't seem to find the brand of this temperature regulator. It's seal went bad and I need to find where to order the replacement from... The trim plate has temps from 55-115. The top valve switches tub to bath and the bottom one plugs the drain.. cj4rbw61acs
What type of threading does an outside water valve have?
[ 1 Answers ]
I need to connect PEX water pipe to the end of an outside water valve and would like to use either a sharkbite or gatorbite connector. What am I looking for when buying the connector? The connector has to swivel to be able to remove it and reconnect it to the valve. What number should I be looking...
Repair parts harden industries shower valve
[ 4 Answers ]
I have a Harden Industries shower valve and it only lets hot water through the valve. I need to replace the cartridge. Do you know where I could buy the Harden parts? View more questions Search
|