Ask Experts Questions for FREE Help !
Ask
    krazyod21's Avatar
    krazyod21 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 14, 2011, 01:31 AM
    Has anyone ever seen this type of tub faucet valve?
    I can't seem to find the brand of this temperature regulator. It's seal went bad and I need to find where to order the replacement from... The trim plate has temps from 55-115. The top valve switches tub to bath and the bottom one plugs the drain..
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jan 14, 2011, 08:53 AM

    A picture or brand would be helpful

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Single valve tub faucet problems. [ 1 Answers ]

My single handle valve in my bath stopped working. If I have it set on cold all is well, but when I turn it to add hot water to the mix the handle is pushed forward and all water flow ceases.If I apply pressure to the handles the water flows. If I turn the valve to a cold only position, the valve...

Tub to tub/shower conversion: Need to re-route water lines for a shower faucet? [ 12 Answers ]

Hello everyone, My wife and I just moved into an old (1930s) Spanish house in Los Angeles. We have 2 bathrooms, with the master bathroom containing a bathtub and a separate shower stall. The shower stall is tight with a low ceiling and the bathroom has no exhaust fan (only 2 windows) and...

What type of threading does an outside water valve have? [ 1 Answers ]

I need to connect PEX water pipe to the end of an outside water valve and would like to use either a sharkbite or gatorbite connector. What am I looking for when buying the connector? The connector has to swivel to be able to remove it and reconnect it to the valve. What number should I be looking...

Can't identify brand type stem valve to shower [ 14 Answers ]

Can someone possibly identify the make of my stem valve.. . most likely the original in a house built in 1960. My cold water valve leaks through the shower head. The brass is broken & cracked all around the rubber seal at the end so replacing the seals doesn't help. I thought it was a...

How do I update a standard tub faucet with a diverted type? [ 1 Answers ]

I want to install a Delta rp42915 model faucet


View more questions Search