Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Has anyone ever seen this type of tub faucet valve?
[ 1 Answers ]
I can't seem to find the brand of this temperature regulator. It's seal went bad and I need to find where to order the replacement from... The trim plate has temps from 55-115. The top valve switches tub to bath and the bottom one plugs the drain.. cj4rbw61acs
Single valve tub faucet problems.
[ 1 Answers ]
My single handle valve in my bath stopped working. If I have it set on cold all is well, but when I turn it to add hot water to the mix the handle is pushed forward and all water flow ceases.If I apply pressure to the handles the water flows. If I turn the valve to a cold only position, the valve...
Tub to tub/shower conversion: Need to re-route water lines for a shower faucet?
[ 12 Answers ]
Hello everyone, My wife and I just moved into an old (1930s) Spanish house in Los Angeles. We have 2 bathrooms, with the master bathroom containing a bathtub and a separate shower stall. The shower stall is tight with a low ceiling and the bathroom has no exhaust fan (only 2 windows) and...
What type of threading does an outside water valve have?
[ 1 Answers ]
I need to connect PEX water pipe to the end of an outside water valve and would like to use either a sharkbite or gatorbite connector. What am I looking for when buying the connector? The connector has to swivel to be able to remove it and reconnect it to the valve. What number should I be looking...
How do I update a standard tub faucet with a diverted type?
[ 1 Answers ]
I want to install a Delta rp42915 model faucet View more questions Search
|