Ask Experts Questions for FREE Help !
Ask
    Pbailey's Avatar
    Pbailey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 21, 2015, 08:19 AM
    Craftsman lt 1000
    I change starter and lawnmower just click , what could be wrong?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 21, 2015, 08:49 AM
    What was the reason you changed the starter? Could be a bad engine(frozen). Can you manually turn it over? Bad or low battery. Does this engine have a solenoid? Make sure starter is full seated into the bell housing. Make sure it is the right starter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to adjust the v-belt on a craftsman tl 1000 [ 1 Answers ]

I replaced the v-belt but it seems to be still loose and barely moves the blade and smells like its burning . I think its because the blade isn't tight enough , How do I tighten the belt ?

Craftsman LT 1000 won't turn over [ 3 Answers ]

I try to start the lawnmower. It makes the noise to start but won't turnover. Anyone have any idea

Craftsman LT 1000 42 inch deck [ 16 Answers ]

I replaced the drive belt and a pulley that were broken. Now it will not move. It is an automatic. What actually makes the tractor move. The belt turns but doesn't go anywhere. Thanks

Springs under a Craftsman LT 1000 rider [ 7 Answers ]

Hi, I was mowing the other day and my mower ran out of gas. Well I put more gas in and started to mow again and it started but every time I let off the clutch it starts to die. I got looking underneath and I see a long spring that's connected on one end but not the other. Could that be the problem...

Craftsman T L 1000 RIDER [ 1 Answers ]

When I Start The Rider Up It Starts Fine. When I Release The Clucth, In Gear Our In Neutral, It Dies Out. If I Have It Running W/ The Clutch In And Engage The Blades, It Dies Out. Any Ideas?

View more questions Search