Ask Experts Questions for FREE Help !
Ask
    ump's Avatar
    ump Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 6, 2015, 12:40 PM
    How to replace a hunter fan switch with black, gray, green and brown?
    Trying to replace the fan switch in a hunter fan with black,green,brown and grey
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Feb 6, 2015, 07:28 PM
    Unfortunately there is no code for this type of switch. However, black is usually primary so start there -black hot to black switch and try various combinations until you have them connected properly.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where can I find a replacement fan switch for a hunter ceiling fan to replace a well [ 2 Answers ]

Where can I find a replacement fan switch for a hunter ceiling fan with a well Tec switch part no e116997

Harbor breeze 4 wire fan switch how do the wires go, I have black brown gray and gree [ 1 Answers ]

Wiring a fan switch, did not mark wires, and have 2 low speeds and high speed. Wire colors are black green gray and brown

How to replace the fan/light switch from Hunter 27186 to 27182 [ 1 Answers ]

I have two wires on Hunter fan/light switch 27186 that are both black and I bought Hunter 27182 switch to replace it and it has red, blue and black wires coming from it. How am I supposed to install 27182?

Trying to install a new hunter ceiling fan and a new hunter switch fan and dimmer in [ 1 Answers ]

Trying to install a new hunter ceiling fan and a new hunter switch fan and dimmer in one... I can get the light to work on the dimmer and or the fan and light on the dimmer but not the fan to work on the fan switch... I don't know where the blue wire coming out of the switch goes ...

I have Hunter Fan with wire colors yellow, white, gray, black, how are they wired? [ 1 Answers ]

I have a hunter fan I purchased three speed switch. The fan wires are yellow white black and gray how should they be place into positions 1, 2, 3, L, aine the previous switch was a one speed?/


View more questions Search