Ask Experts Questions for FREE Help !
Ask
    josborne02's Avatar
    josborne02 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 16, 2014, 06:52 AM
    Harbor breeze 4 wire fan switch how do the wires go, I have black brown gray and gree
    Wiring a fan switch, did not mark wires, and have 2 low speeds and high speed. Wire colors are black green gray and brown
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Sep 16, 2014, 07:15 AM
    Since there is no code as to how wires are colored, at least for this application, it is a trial and error method. Start with black to black and then start swapping wires.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Which wires connect with a zing ear ze 2082 and a harbor breeze fan. No light [ 0 Answers ]

When the chain broke the fan got stuck on high speed. So I turned of the electric at the box and pulled the fan wires apart being careful to cap each one so they did not touch. Stupid me didn't pay attention to which wires connected where. My friend changed the switch but had to leave before he...

I am trying to wire a switch with a harbor breeze switch to operate the fan and the s [ 2 Answers ]

I am trying to wire a switch with a harbor breeze switch to operate the fan and the switch has 3 sets of black and white wires along with the grounding wire. How do I wire this to the fan switch which only has a grounding wire and 2 black wires?

Wire fane with 3 wires harbor breeze [ 2 Answers ]

How do I wire a fan with 2 wires to 3 wires?

Harbor Breeze Fan switch 5-8 wire [ 15 Answers ]

I'm trying to install a Harbor Breeze Fan switch 5-8 wire. My problem is there are red, purple,pink, yellow, brown, white, black wires where do I connect them into the switch? HELP

Harbor Breeze Ceiling fan 4 wire switch [ 1 Answers ]

The pull cord for our fan broke.. when I took the switch apart to replace it.. the four wires (black, grey, brown, and purple) popped out before I could make note of were they were supposed to go... the model number of the fan is... FI52BNK5LK... please help. Thanks a ton

View more questions Search