Ask Experts Questions for FREE Help !
Ask
    arielaguilon's Avatar
    arielaguilon Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 12, 2014, 01:43 AM
    Roybi cordless drill help desk
    18V Roybi. After I open the unit, the drill doesn't reverse anymore. Do I have a bad switch? Or something wrong with the battery?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Dec 12, 2014, 11:07 AM
    Nothing wrong with battery. Nothing wrong with switch. You either did not reassemble it properly or you damaged something.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Dec 12, 2014, 03:13 PM
    There is a detent under the directional slide switch. You possibly reassembled it with the switch in one position instead of in the middle. Nothing wrong with battery.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ryobi 18v cordless drill sparking [ 4 Answers ]

3 y/o drill lost power while applying excess force on screw. Smelled something wrong. Would not perform properly afterwards (very slow speed). It worked (spun briefly) OK 1/2 hr later but w/ blue/green sparks inside motor. Battery OK. Did I permanently damage the drill? Would I cause anymore...

Hitachi cordless drill model number [ 3 Answers ]

I am condsidering purchasing a Hitachi DS18DMR cordlees drill but when I search for it sometimes I see the same model with a PS at the end(Hitachi DS18DMR PS). Does this mean there is a difference?

3/8 in cordless craftsman drill [ 1 Answers ]

I need a chuck assembly this old drill the chuck does not un-screw it is on a geared shaft the gears come off but the chuck is attached to a long shaft with splines and lock rings

What kind of drill do I need to use to drill holes for 1 1/2" pvc plumbing. [ 6 Answers ]

I'm running 1 1/2" pvc for a basement bathroom vanity and a wet bar. Do I need to get a Forstner bit or is just a regular hole saw best for drilling my 2x6 wall studs? Also, is 2" the correct size, or should I go to 2 1/8" or 2 1/4".

Cordless Drill power options [ 9 Answers ]

What is the difference between a 1/2" and 3/8" cordless power drill? Does one have more power than the other, or do they hold different size bits? Which tool would be better to have for average, around the house improvement projects? Not talking about major construction work here. Also, what...

View more questions Search