Ask Experts Questions for FREE Help !
Ask
    henrye's Avatar
    henrye Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2009, 03:50 PM
    3/8 in cordless craftsman drill
    I need a chuck assembly this old drill the chuck does not un-screw it is on a geared shaft the gears come off but the chuck is attached to a long shaft with splines and lock rings
    Scleros's Avatar
    Scleros Posts: 2,165, Reputation: 262
    Hardware Expert
    		  
    #2

    Jan 24, 2009, 08:42 PM
    If you have a model number for the drill, there may be an assembly diagram at SearsPartsDirect.com. Most drill chuck spindles are either threaded or tapered. Jacobs Chuck Technical Support: Chuck Removal and Installation discusses both types and is generally applicable to other brands of chucks. I haven't seen a lock ring type chuck on cordless drills, could you post a picture?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GE cordless phone [ 4 Answers ]

Handset no dial tone - displays "No Link to Base". How to rectify

Craftsman drill press MOD 21334 off center [ 1 Answers ]

Cannot find reason for the slanted hole. All adjustments are set correctly, and everything looks square and normal.

900mhz cordless phones [ 2 Answers ]

I used to have a 900mhz cordless phone which I could walk to the barn with 150ft from the house. We could take it when mowing doing yard work or having a picnic. Well it died and I bought a 5.8ghz. Made by uniden from staples with 5 cordless units I thought this will be great one in the barn, one...

What kind of drill do I need to use to drill holes for 1 1/2" pvc plumbing. [ 6 Answers ]

I'm running 1 1/2" pvc for a basement bathroom vanity and a wet bar. Do I need to get a Forstner bit or is just a regular hole saw best for drilling my 2x6 wall studs? Also, is 2" the correct size, or should I go to 2 1/8" or 2 1/4".

Cordless Drill power options [ 9 Answers ]

What is the difference between a 1/2" and 3/8" cordless power drill? Does one have more power than the other, or do they hold different size bits? Which tool would be better to have for average, around the house improvement projects? Not talking about major construction work here. Also, what...

View more questions Search