 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace model UGEB-10NE-GS is on lockout mode. I already replaced the limit switch.
The furnace is on lockout mode. I replaced the high limit switch and I and the fan still runs eve if I disconnect all the wires from the thermostat.
What should I check next? |
||||
Check out some similar questions!
I have a Miller furnace that I have replaced limit switch 626337 and aux switch 62639
[ 0 Answers ]
Blower will not come on when furnace comes up to temp but can turn blower on with switch in fan setting.
Intertherm furnace model mbh 080 limit switch?
[ 0 Answers ]
I have Intertherm furnace Model MBH 080, a 1980 furnace. I want to know the part number of the limit switches in this furnace. I'd like to order these switches which I know there is two of them before I take the old ones out which looks like a big job. Thanks Gary
If my furnace fan is in lockout mode how do I re-set it ?
[ 1 Answers ]
10 yr old Payne central unit with control board.
Hi-limit switch failure on Amana gas furnace model 80SSE
[ 0 Answers ]
Four blinks says reset hi-limit switch. Could not reset stuck button so I replaced it. Still blinks four times. What can I try next?
Rheem Gas Furnace Fan limit switch settings Model # 3214-100fb
[ 1 Answers ]
What are the proper settings for this particular model. The fan stays on way to long after the heat/fire shut down, which then causes the house to cool down quickly.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
