Ask Experts Questions for FREE Help !
Ask
    Bobbyb101's Avatar
    Bobbyb101 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 11, 2014, 04:38 AM
    Garbage disposal
    Neighbor has a garbage disposal that doesn't work. It hums but does not work . I checked inside and there are no obvious obstructions. I hit the reset underneath and I also used an allen wrench to free any obstructions. It appears that there is nothing jamming the unit, the blades are moving freely, but it still hums and does not work. Any ideas? Thx B.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Aug 11, 2014, 04:43 AM
    The table or plate has separated from the motor shaft. Not repairable, at least not worth repairing.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #3

    Aug 11, 2014, 04:53 AM
    As was mentioned... time for a new one.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Aug 11, 2014, 05:38 AM
    also used an allen wrench to free any obstructions.
    Did you find any obstruction to remove? Did the table turn freely while the unit just hummed? Back to you, Tom
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #5

    Aug 11, 2014, 10:02 AM
    I agree with Hkstroud and Smothy time for new one, Thanks.

    John

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Garbage disposal [ 2 Answers ]

If a garbage disposal's blades no longer grind and make that loud, deep sound, does that automatically mean I need to have a whole new disposal installed? When I turn on the switch, I do hear the whirr of a motor, but there doesn't seem to be any grinding going on. I did check the area for fallen...

Garbage Disposal [ 5 Answers ]

I seem to have left my disposal on all night because the switch was in the on position when I woke up the next morning. Now it won't turn on at all? Did I burn the motor up in it?? Need some help to get it working again...

Garbage disposal [ 8 Answers ]

I want to put a garbage disposal in my restaurant but I am not sure if it will work with my sink. I have a standard commercial sink with about a 1 1/2" drain. Can anyone tell me what is involved if anything to complete this project?

Garbage Disposal [ 1 Answers ]

Disposal is working but water is backed up and won't go down.

Garbage disposal [ 1 Answers ]

I have never had a problem running my garbage disposal before until I replaced it with a bigger and better one. Now my disposal backs up, and when I run the disposal, it backs up into the adjoining sink! Please help! Hi Mom, Sounds like you have a clog in the lateral, (horizontal ) pipe in...


View more questions Search