Ask Experts Questions for FREE Help !
Ask
    gregdanson's Avatar
    gregdanson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 14, 2014, 02:22 AM
    MDL Lawnflite cutter blade clutch repairs
    I have a ride on mower Lawnflite model no 13DJ51GN690, product name GLX 105RH withhydraulic transmission and mechanical cutter blade clutch. The clutch is slipping all the time now and is fully adjusted. Can the clutch be stripped and new parts fitted or repaired? I cannot find a workshop manual for it? Thanks for any advice. `````````````````````````````````````
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 18, 2014, 10:55 PM
    Hi,
    You need to check that model number. It does not appear to be correct. The 1 that its starts with means lawn mower, the next digit (3) means rider. The DJ are okay as far as I can tell. Next is noramlly a three digit number that is the frame model, first digit, and then the exact model in the last two. That very last letter, N, is a mulching deck that I think is used in Great Britain? That could be why I do not recognize the 690 vendor number. But a search in the European manual database give an error just like the US one.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman 42" rider 15hp Kohler runs, dies when clutch released or cutter deck lowere [ 2 Answers ]

Craftsman 42" rider 15hp Kohler runs, dies when clutch released or cutter deck lowered. Seems like a safety switch problem, no idea how to troubleshoot Any insight greatly appreciated In advance, many thanks for any replies craiga

Brush Cutter Clutch Assembly or P.T.O. - equipment [ 1 Answers ]

Why do different 2-stroke engine models of the same brand of brush cutter (like Kawasaki brush cutters)have different type of Clutch Assembly? For example, a Kawasaki TD040J-AC63 Brush Cutter has clutch assembly # 13081-2218 while a Kawasaki TH034D-BT75 Brush Cutter has clutch assembly #...

Chicago tubing or conduit cutter blade; can I replace it? [ 3 Answers ]

I had this idea that since I only needed a tubing cutter for 10 or so cuts on some 3/4" EMT (Electrical Metal Tubing) that I would get a used one on eBay. Besides, old tools are made better... right. No plastic... right? O.K. so I lay out $8 including shipping. When it gets here and I take a look...

Lawnflite belt repairs [ 1 Answers ]

Lawnflite 705LA I need to replace a drive belt on my mower, only way I can see to get it on to pulley is to disconnect pulley from engine. How do I stop pulley turning hen I try toundo nut also is it left or righthand thread?

Noma chipper cutter blade removal, HOW? [ 1 Answers ]

Would like to remove and sharpen blades and beaters on Noma chipper/shredder Model D1705000. Can not seem to get it unstuck. Any suggestions? Is it a keyed/tappered shaft? Thanks

View more questions Search