Ask Experts Questions for FREE Help !
Ask
    stembosnr's Avatar
    stembosnr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 20, 2010, 07:04 AM
    Lawnflite belt repairs
    Lawnflite 705LA I need to replace a drive belt on my mower, only way I can see to get it on to pulley is to disconnect pulley from engine. How do I stop pulley turning hen I try toundo nut also is it left or righthand thread?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 21, 2010, 08:20 AM

    Hi,
    4 bolts take the guide plate loose and let it drop down out of the way.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mtd lawnflite drive [ 7 Answers ]

I have a 11hp briggs and stratton powered mtd lawnflite. There is a problem with the drive to the wheels. It was progressive over last summer (where I lost drive to 5th gear, then 4th etc etc)and now I need to mower the grass it will not move when I put it into gear. Any ideas? Kind regards...

Lease provided repairs vs. Design/decorative repairs? [ 2 Answers ]

Since buying our home we have painted various rooms, replaced old doors with new nice wooden ones and changed out the old closet doors also for new ones. We have re-done the trim work (baseboards and door/window frames) in these areas too. The rest of the home is in good condition, but not newly...

M.T.D. Lawnflite [ 1 Answers ]

I have a MTD lawnflite ride on mower, with a briggs 16 1/2 HP engine, 40 inch cut. The axle/gearbox does not engage drive as normal, but when put in to gear clonks and judders violently. I have replaced stub axle bearings as I know these can cause the chain wheel to snatch, the trouble is in the...

View more questions Search