 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Installing a Hunter Fan w/ Light Kit & Remote control $ separately
I have a separate switch for the fan and light, thus black, red & white, however when I install the remote control kit, it only has a black and white. Does this mean I need to abandon the one switch / red wire and only use one switch instead of two?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Good morning. I thought I had this nipped but after two hours and turning the breaker back on; I was disappointed. My question is about the existing wiring. We wanted to replace a fan in our sons room. It was controlled by a wall switch. The existing wiring from the jbox to the wall switch...
I installed the universal hampton bay remote kit and when the fan runs over our bed the light strobes on and off. Quite the distraction. Anyone know a fix, is it a bad receiver?
I have replaced old remote control with a new one, but to acitvate I have to turn on the light and the fan on high manually, but I have no chains for the fan or light. Can you help please.?
Hi, I have a Hunter fan with light and remote control, with reversible switch on the remote. RC was working fine until recently, and now, the fan will not turn off with it. I do not have a wall switch. The light works fine with RC, and the reversing also works, so does the fan speed. So, what...
I am installing a HarborBreeze Thermostate Ceiling Fan & Light Remote Control on a standard ceiling fan (no I can't find the brand or model name) with a pull chain for the light and a pull chain for the speeds. There are 3 speeds on the fan. My problem is that there are only five wires on the...
View more questions Search
|
