Ask Experts Questions for FREE Help !
Ask
    pleopardPAUL's Avatar
    pleopardPAUL Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 3, 2014, 04:00 AM
    Water pump lost pressure
    Electric water pump used to pump from dam to tank about 25mt above dam. Pump spec 42mt head.has lost press. It pumps bt at vey low pressure
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Mar 4, 2014, 08:11 AM
    You will have to troubleshoot it starting at the pump. There's no way to guess what is wrong.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

We have lost water to our hose, in the pump house the submersible pump motor trips [ 3 Answers ]

We lost water, so we went to the pump house the submersible pump motor tripped, we clicked the reset button and it builds pressure to about 38 PSI then trips again, so we replaced the motor, no change does same problem, so we replaced the 30/50 pressure switch, same problem exists.

Well pump have lost pressure [ 1 Answers ]

HI, My 14 years old well pump have lost it pressure and a little pressure when it start but within 1 minute it stop pumping water for few minutes and again pumping but with a little pressure.. before it takes 10 minutes to fill the tank but now it taking hours. Please help me to solve the...

Submersible pump lost pressure [ 1 Answers ]

I have a submersible pump that has lost pressure. It is reading 13 psi. The bladder tank is also not filling and the pump is not shutting off. Please help.

I had a seal on a pipe from the well to my shallow well pump blow out. Lost pressure [ 1 Answers ]

I replaced the seal on the pipe from the well to the pump. The tank is full of air, and I think the water in is still in the pipe to the footvalve. If I remove the pressure gage, how much water is needed to get the pump primed? Do I need to let the air out of the tank?

Lost pressure to pump [ 1 Answers ]

We have an above ground water pump connected to an underground storage tank. We just had the tank filled, but there is no pressure in the pump. How do we re-prime to get it going again? Chuck

View more questions Search