Ask Experts Questions for FREE Help !
Ask
    bedriana73's Avatar
    bedriana73 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 29, 2014, 09:32 PM
    Our boiler has a code b - 30 and we are not sure what it is.
    Our Weil McLain boiler has a code of b-30. We have no idea what it is. Could anyone tell us what it means in plain english? We are going on night 5 with no heat. Please help.
    Kukui23's Avatar
    Kukui23 Posts: 27, Reputation: 1
    New Member
    		  
    #2

    Feb 1, 2014, 02:45 PM
    Need more specif info.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What does a code 2 on a Buderus 600 boiler mean? [ 1 Answers ]

We have a Buderus 600 boiler, which is approximately 10 years old. It has a code 2 showing on it and it is not working. We have had plumbers out who have replaced the pump, thermostat, timer switch and still no luck. Any ideas?

The back boiler from our solid fuel boiler is not heating the water in the cylinder [ 0 Answers ]

Our back boiler heats the water via the open fire. Lately the water is slow to heat in the cylinder and the pipes leading into the tank are extremely hot but the cylinder eventually heats but totally to the bottom of the tank. Would the back boiler be leaking or just full of gunge from 19 years of...

Spark ignition gas boiler Weil McLain pilot lights but boiler doesn't s [ 2 Answers ]

Spark ignition gas boiler. Weil McLain gas boiler. The pilot lights but the boiler doesn't start.

Is my hobart 600 a steam boiler or a hot water boiler. There is no circulator pump [ 0 Answers ]

I have a Hobart 600 automatic gas fired furnace. The first thing is I cannot see a circulater pump or a air tank. I can not tell if it is steam or hot water. When I go to fill the system with water, the system fills and then the water continues to flow out to the drain pipe.

Weil mclain ultra boiler HARD LOCKOUT CODE 12 [ 0 Answers ]

My Weil Mclain Ultra 80 Boiler display shows a hard lockout code E12... Pressing the reset button does nothing... ie the display will not then change back to the normal standby or operating mode... Removing the thermostat wires and then jumpering the thermostat terminals 5 and 6 on the low...

View more questions Search