Ask Experts Questions for FREE Help !
Ask
    Texana's Avatar
    Texana Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 6, 2014, 01:16 PM
    Trane XE 78 burner fails to ignite
    After ignition, the burner fails to ignite. I tried to reset if the system was locked. The unit blows cold air if allowed to continue after turning on heat.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Jan 6, 2014, 06:56 PM
    What do you mean by "after ignition"?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Comfortmaker rpj ii fails to ignite [ 0 Answers ]

I can turn on the heater at the thermostat and the fan blower comes on. Periodically the electric glow rod (?) lights up but it does not light any gas in the three tubes (burners). I do not smell gas. There is gas going into the house as the gas fireplace and water heater works and I have verified...

Trane ex90 furnace burner will not ignite [ 0 Answers ]

Furnace will not work, seems the electronic igniter is not lighting so nothing is happening but I did turn the A/C on and the blower motor and everything works fine for that. A red light is flashing on some panel not sure if that's normal though.

Bryant 383KAV Furnace repeatedly tries to ignite but fails [ 3 Answers ]

For the last two nights (very cold weather) our Bryant Furnace appears to be attempting to start, fan kicks in and the burners ignite then it shuts off 2-3 seconds later this happens repeatedly. The first night (around 3 am) I noticed this I turned the heat off with the thermostat and left it for...

Bryant Gas Furnace fails to ignite [ 3 Answers ]

My Bryant Gas Furnace occasionally fails to ignite. When this happens, I can reset it by turning the switch by the furnace off and on. It will then ignite after sparking for 30 seconds or so. The furnace has a pilot that is on and becomes large when the thermostat directs it to, but after sparking...

Trane xe 80 burner will not ignite [ 3 Answers ]

I have a forced hot air Trane xe 80 furnace. Electronic ignition. At times the burner will not ignite. The fan motor runs and only cold air is coming out. If I turn the furnace switch off then on again, it will glow and then the burner will ignite. This could last for days, then it will do it again.

View more questions Search