Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
No hot water in kitchen sink and lavatory in bathroom but plenty hot water everywhere
[ 0 Answers ]
I helped my friend install a shower valve' once installed, we check for leaks, so far is good.the valve still has the test cap on it, no additional parts has been install to the valve. My friend turn off the power to the water heater, the water heater has a timer installed. While everything is back...
I have lost both hot and cold water pressure in my bathroom sink
[ 3 Answers ]
All other water sources in the condo are fine, any suggestions? Thank you
No water in hot or cold bathroom sink after flushing my gas hot water heater
[ 5 Answers ]
Thank you. I flushed my hot water heater last night. I only turned the cold water intake to the heater off and on BUT now, after the flush, my second floor bathroom sink faucets (both hot and cold) don't work at all. The shower and the tub in the bathroom work but NOT the sink- HELP! Thanks so...
How do I shut off the hot water to change the hot water valve of my bathroom sink ?
[ 4 Answers ]
Hi there ! The hot water valve to the sink leaks a bit and I want to change it before I start painting. I know I have to close the main valve but what do I do with the hot water tank ? Do I shut it off or empty it and if so how I do I go about filling it again ? :confused: Thanks to whoever...
No hot water on the shower but hot water on the tub & sink
[ 39 Answers ]
Hi, I work at a hotel that has a 105 rooms in total. For the past several weeks, we've been having some hot water issue. Randomly, the rooms are not getting hot water on the shower however there is hot water on the sink & the tub. Our maintenance worked on the problem for several weeks but... View more questions Search
|