 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane 50a55-571 control board - vent motor won't shut off
Trane 50A55-571 Control board - Vent motor won't stop running and no heat. I disconnected the transformer and motor still running. Light on control board flashing "Normal no call for heat". Does this mean the board is bad?
|
||||
Check out some similar questions!
I have a Trane xe80 furnace. I hear a small hum from the control board when the furnace is not running. Is this normal? The red light blinks as usual.
Just put on new conversion control board on trane 80. Led lights up but nothing happens. Jumped thermostat and inducer and blower comes on but light blinks 4 times( open temp limit circuit). Have my family in house n its turning cold. Worked on many units install not tech. Need help.
Do they still make this board? I have tried everything seems to be burn mark on back of board
Help! A/C unit went out last night. Opened inside unit up (Trane XE80) and pulled the 5 amp blade fuse on the control board and saw that it had blown. Replaced the 5 amp fuse, closed the panel, and the blower started. When I went to turn on the A/C, the 5 amp fuse blew again (and again). ...
Hi there... This is my first question and I would appreciate your expert help: The circuit breaker for my Trane central air unit tripped and upon further investigation, I found some sort of short circuit behind the Integrated Furnace control board CNT 2789. I saw a big spark behind the board...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
