Ask Experts Questions for FREE Help !
Ask
    craigcd7's Avatar
    craigcd7 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 3, 2011, 01:46 PM
    My trane xb80 not working. Think it might be contral board? White rodgers 50a55-571
    Do they still make this board? I have tried everything seems to be burn mark on back of board
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Feb 3, 2011, 03:31 PM

    I know I bought a 50a55-?? Board just over a year ago (at Grainger's), but I'm sure if you Google the model number you can find either this exact board or a equivalent. I'd expect to pay somewhere over $100.

    Good luck,
    WallyH
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane XB80 Furnace not working [ 20 Answers ]

I don't have a copy of the owner's manual to properly troubleshoot the furnace. So, I just follow the written instruction on the cabinet. I turned off the switch and the gas valve, and then waited for the smell of gas. When I didn't smell any gas I then proceeded by turning on the gas and the...

Trane xb80 furnace not working need help [ 0 Answers ]

I checked all the pressure switches and they are properly working. My furnace comes on and after a few seconds turns off ( has strong blue flames) so not a gas problem. Does anyone know how to help. Thank You.

Trane XB80 quits working on hot days [ 1 Answers ]

My AC quits working on really hot days (+100 degrees). The thermostat just goes blank. After the sun goes down and the attic cools off (AC is in attic) the thermostat comes back on and the AC starts up. This happened for two days. The third day I turned the fan to "ON" and left it running...

Trane XB80 Not working (hot or cold) [ 1 Answers ]

My furnace/ac is not working. The thermostat was blank, so I replaced it and still, no functions on the Trane XB80. I checked the circuit breaker and it is on. I also tried heat and cold. Is there a reset on the unit? I do not have the manual. Thank You Colin

Burned White-Rodgers 50A50-471 Furnace Control Board [ 29 Answers ]

I woke up this morning full of Christmas cheer and then I noticed it was too cold (I have compromised with my wife to turn the heat down to 65 degrees at night, but not 60! Brrr!) I noticed the circuit breaker was tripped so I reset that. The circulation blower comes on but no ignition or...

View more questions Search