Ask Experts Questions for FREE Help !
Ask
    eclau's Avatar
    eclau Posts: 3, Reputation: 1
    New Member
     
    #1

    Aug 14, 2013, 02:42 PM
    Trane xe80 control board
    I have a Trane xe80 furnace. I hear a small hum from the control board when the furnace is not running. Is this normal? The red light blinks as usual.
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
     
    #2

    Aug 15, 2013, 05:44 AM
    There are some small relays on the control board which might possibly hum a tiny, tiny bit, but I would lean towards the 24 volt transformer as being the hummer. Unless it is fairly loud (or quite hot), a slight hum for a transformer is normal.

    Hope this helps,
    WallyH
    eclau's Avatar
    eclau Posts: 3, Reputation: 1
    New Member
     
    #3

    Aug 15, 2013, 10:12 AM
    OK, thanks

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane xe80 control board failure replacement [ 0 Answers ]

I have just replaced my TRANE XE 80 control board and the fan comes on immediately and the LED blinks 5 times. I have checked all the rollout sensors and the fan and blower sensors and they are good. I have jumped all the sensors out at the control board and still get the same result. I have...

Trane xe80 internal control board failure, red light on steady [ 1 Answers ]

Trane xe80 internal control board failure, red light on steady

Location trane xe80 internal control [ 1 Answers ]

Location of internal control trane xe80

Trane xe80 internal control board failure, red light on steady [ 0 Answers ]

My furnace runs for a while then the flame goes out but the blower keeps running. Control board has solid red light that means internal control board failure (replace)I turn off the power to the unit and then turn back on, it runs for a while then repeats. Seems to get worse the colder it is outside

Trane XE80 Control Board / Booster Fan Questions [ 4 Answers ]

The blower on my parents Trane XE80 gas furnace stopped working this weekend and a local HVAC company diagnosed the problem as a bad control board. The technician didn't have a board on his truck so he temporarily bypassed the control board and wired the fan to stay on 100% of the time until he...


View more questions Search