Ask Experts Questions for FREE Help !
Ask
    BESAFE's Avatar
    BESAFE Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 23, 2013, 12:52 PM
    Goodman furnace problems
    I have a goodman furnace gmnt 080 does not happen all the time
    The exhaust motor starts shuts off starts shuts off finally starts and runs fine.
    hvac guy's Avatar
    hvac guy Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Nov 23, 2013, 02:11 PM
    Check to see if you are losing power to the motor first if your not you'll need to replace the inducer motor. If you are losing power to motor,check wire connections, and if thoughs are good change circuit board.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace problems [ 21 Answers ]

Hi - I have a Goodman GPM furnace. It works intermittently. I replaced breaker, thermostat, Control board and surface igniter. All appears well on start up sequence ; blower runs and igniter heats up and then turns off as no gas comes out. Control board codes says OK. Can anybody recommend what to...

Goodman Furnace Problems [ 1 Answers ]

Please help. My Goodman furnace is leaking from the little condensator pump. The pump will not shut off. Is there anything I can do until a technician comes out 5 days from now? The furnace works.

Goodman furnace problems [ 1 Answers ]

I have a goodman furnace but I seem to have misplaced the tag that was inside the furnace letting me know the model number of the furnace. I treid calling the company and they have no way of finding it and I don't believe the previous owner registered the furnace when it was installed. Is there any...

Goodman furnace problems [ 1 Answers ]

I have a Goodman GMNT080-4 gas furnace. It stopped working and in checking it out, the control board was corroded, due to moisture ,and some of the dioids ends were rusted and broken from the sodder . I replaced the control board (B18099-13), but it still would not work. I have power to the board,...

Goodman furnace problems [ 1 Answers ]

The system comes on, the igniter glows, the burners light, and the fan comes on. Why does my system cycles on and off? The error code is for 4 flash. I replaced the limit switches. The system still cycles on and off. Why?

View more questions Search