Ask Experts Questions for FREE Help !
Ask
    lisaomaha's Avatar
    lisaomaha Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 18, 2013, 10:15 PM
    Will a wall switch work instead of a remote for a ceiling light fan?
    I installed a Hampton bay Mediterranean 52" Transitional Collection model 433158. I hooked it up without the receiver to the remote control. I also hooked up a Lutron fan control and dimmer Skylark S2-LFSQH-WH. The fan and light come on when I turn the breaker back on I don't seem to have the Lutron hooked up correctely. Yes you guessed it I am not even close to a licensed electrician. Just a girl trying to improve her house. Please help. Thank you
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Sep 19, 2013, 05:25 AM
    How many wall switches do you have? You will need 2 separate ones.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Sep 21, 2013, 08:43 AM
    If the Fan has pull chains, you may be able to eleminate the receiver, fan wire is usually black, light wire is usually blue or black/white. Separate wires would allow separate control.
    If you have a constant hot in the fan box, fan could be pull chain(usually quiter than if controlled).
    Then have the light on the dimmer.
    If a you get an extra wire to the fan or 1 is capped off, you could connect to a combined dual slider to control light and fan in 1 device.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Will my wall switch for a ceiling fan still work if I install a remote too? [ 1 Answers ]

I have two wall switches, one of them with a slide adjuster for fan speed and the other for the light. I installed the ceiling fan with remote per manufacturer's instruction, but have a red wire left over. Does that mean the switch won't work for the fan and only the remote? Is there a way to...

Hasley Ceiling Fan with Remote - Controlling the Light with the Wall Switch [ 0 Answers ]

How can I configure a remote controlled ceiling fan such that both the remote and the wall light switch can control the light? It is a Hasley Ceiling Fan and Light with remote control (UC-7040) that has a LIGHT DIMMER button for the light, and HI - MED - LOW - FOR/REV - OFF buttons for the fan....

Wiring ceiling fan remote and wall switch? [ 0 Answers ]

What do I do with the red wire coming from the ceiling

Ceiling fan does not work with remote or wall switch [ 2 Answers ]

We have a Hampton Bay Miramar 60" fan that is wired to a wall switch and has worked for five years. Now it not only won't work with the remote but when the wall switch is turned on, the lights strobe. We have checked the remote to make sure it is programmed the same as the fan, and of course,...

Installing wall remote for ceiling fan into wall switch [ 3 Answers ]

I've had no luck with getting the wall remote on my Hampton Bay ceiling fan to work. I was able to get the fan to work with the wall switch, but once I change out the switch with the wall remote it doesn't work. The l.e.d. on the wall remote is not even lighting. There are 6 switches on the...


View more questions Search