 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
The flame censer will not detect that there is a flame and furnace won't stay light.I changed the flame censer,main board,blow out the drain lines and nothing changed
I turn the forced warm air rheem gas fired furnace on at the thermostadt from off to hest and the furnace goes through its cycle and starts. It runs for 5-10 minutes and provides heat and then shuts off and does not restart itself automatically/ I can turn it to off and to het on the thermostdat...
I have Rheem heating and cooling system of the roof Model # RRA-A0030JK06X MANUFACTURED IN 1997. The heater fan comes on and then the burner comes on and 30 sec or maybe a minute later the burner outs out. The red light on the control broad starts to blink 3 times. I f shut the power off the...
Rheem heating furnace pilot light won't stay lite.
Furnace is running and not shutting down, blowing cold air ignitor is not coming on at at all green led light are on and the orange is off. I replaced ignitor recently came on for a few hours and stop, changed it again and nothing happens but the cold air.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
