 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I turn the forced warm air rheem gas fired furnace on at the thermostadt from off to hest and the furnace goes through its cycle and starts. It runs for 5-10 minutes and provides heat and then shuts off and does not restart itself automatically/ I can turn it to off and to het on the thermostdat...
My Rheem quit lighting. I cleaned flame sensor nothing. It does work once in awhile. The 2 green leds light no orange. Once in awhile when it lites I get steady orange. When it tries to lite it will go through whole sequence lite for 10 seconds then go out. Then it won't work for several days. I...
I have a Rheem Criterion II gas furnace, that quit working. I checked it out, and found that the ignighter would come on, the gas would start, and then it would shut off. Figured it was the flame sensor. Before I could sand or replace it, it quit even doing that. I didn't get voltage off the...
Furnace is running and not shutting down, blowing cold air ignitor is not coming on at at all green led light are on and the orange is off. I replaced ignitor recently came on for a few hours and stop, changed it again and nothing happens but the cold air.
I need to know the Rheem Troubleshooting codes on a RGPH-12EAR JR. Or if you could tell me how to get the mannual for this, that would be great.
View more questions Search
|
