 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore washer not working at all?
We have a Kenmore model 110.20022011 washer. Had to stop it during wash cycle to add something. Now the motor runs, but it does nothing and the lights aren't working either, nor is it filling with water-lid isn't locking either. HELP!!
|
||||
|
||||
|
The problem is either the fill switch and/or the water valves. You will need to test them with a meter and check the inlet screens. If you can fill it with water and nothing happens after that then the problem is the water level switch which is a single-pole/double-throw switch. It's easy to test with an ohm meter. It's a common problem. If it tests good then you have a timer problem, but I favor the water level switch. Look at these: https://dl.dropboxusercontent.com/u/...%20Washers.zip
https://dl.dropboxusercontent.com/u/...c%20washer.pdf |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Its showing F01 error code I replaced the ccu unit washer still will not finish wash Its stays on delay 2 minutes left. I also noticed it stays locked and won't unlock. I tried everything checked wires . This all started when I had to replace the washer pump wich was broken . T bought a new one but...
Hi! I have a Kenmore washer that is a little over 2 years old (2 years, 2 months). This morning, Sunday, December 17, 2007, I was washing several loads of laundry and during the last load, it just stopped during the rinse cycle (it filled up to rinse, but that was it). I couldn't get it to do...
I have a kenmore washer that my wife and I got brand new about 2 and a half years ago. All of a sudden the machine will not advance beyond filling the washer with water. After the water fills to the appropriate level nothing else happens! I have tried it on every cycle type and water level and...
View more questions Search
|
