Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Car won't start it turns over slow flat batterie is sealed unit so what can I do
[ 2 Answers ]
Hi I have had no problems with my car at all although it is 10 year old I've only had it 1 1/2 years so after my clutch snapping I got it back from the garage and within 2 days it would not start so I charged the batterie which is a sealed unit with breathe hole but now after 3 days the car won't...
Slow Running AC Unit Seems Like It's Not Getting Full Power
[ 6 Answers ]
I recently had a 30 amp receptacle added for a heavy duty AC unit. After I plugged it up it runs slow, doesn't trip the breaker but I don't seem to be getting full power. The outlet checks out with a multimeter, I did check the breaker box and there is a neutral wire connected to the bus bar but...
Gas furnace blower motor won't start/slow to start
[ 0 Answers ]
I have a airtemp probably 70's model we had to replace the blower motor about two years ago. Now when the fan is supposed to start it either won't start or is very slow to start. When this happens you can manually move the squirrel cage and it runs great through the complete cycle. We just replaced...
Air conditioning unit fan blowing slow
[ 1 Answers ]
My central air unit worked fine last night. In the morning, the unit works but the fan is now very slow. Cold air comes out of the vents but no force and not cooling the house. Why would the fan just all of a sudden run slow?
Sears Kenmore Dishwasher start button won't start unit
[ 0 Answers ]
I have a Kenmore Ultra Wash dishwasher that will not start when pushing the start pad location. It will pump when put on the Cancel/Drain button, but will not start after that. It does have power, or the pump would not run during the Cancel/Drain cycle. The washer was purchased in Jan 20, 2006... View more questions Search
|