 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My hampton bay remote works only for the fan and not the lights?
My question is how to fix the problem with a remote - The Hampton Bay Ceiling Fan Remote works for the fan perfectly but recently stopped working for the light fixture - will not turn on or off the lights? Do we need a new remote?
|
||||
|
||||
|
You might need to replace your remote (not uncommon). Before that, try and reset your dip switch and battery. Remove battery from remote, more a switch or two to a different position and then back to original setting. Replace the battery with a new one. (remember to return the dip switches to the original settings). If this didn't help, it is easy to check the wiring connections for the light kit. Making sure the connector is tight and the wires aren't severely kinked. Home Depot has remotes for Hampton Bay fans. Just set the dip switch to match the old one. Hope this was helpful.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I figured this may help somebody here. I have a Hampton Bay remote controlled ceiling fan... the kind without pull chains... and the remote will only operate the fan portion but not the light. The light is always on. Not a big deal, as the light switch on the wall could be used to turn the light...
All of a sudden last week the remote stopped working on my Hampton Bay fan.. (model: #55295, 54 inch Brushed Steel w/Remote) Things I have done: 1) Replaced the batteries in the remote 2) Ensured the dip switches match on the remote and the fan 3) Ensured there is power going to the fan ...
I just installed a Hampton Bay with light kit and no remote. I connected white to white, black to black, blue from fan to red from house. Fan has pull chains for fan and lights. Light is also controlled by wall switch. Light work for 2 minutes but stopped after that. The fan still works. I...
Sorry if this has been answered elsewhere but I couldn't find what I was looking for. I just installed a Hampton Bay Andover fan w/ remote (no pull chains) but the fan won't start. The light fixture works fine (using the wall switch remote) but I can't get the fan going. I tried the reverse...
I hung a hampton bay ceiling fan (Huntington III), controlled by a simple single light switch, and the fan works well, but the lights do not work at all. I wired white to white, black to black, green and blue to outlet box ground. I am guessing that it's a manufacturer's defect, since it is getting...
View more questions Search
|
