Ask Experts Questions for FREE Help !
Ask
    tm3600's Avatar
    tm3600 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 24, 2013, 03:01 PM
    Water continues to run, will not start cycle
    My washer continues to run water, will not fill up will not start cycle
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Feb 25, 2013, 04:54 AM
    For some reason your water level switch is not closing. Look at this: https://dl.dropbox.com/u/8010163/Und...c%20washer.pdf
    The switch has a clear plastic hose that could be stopped up or have a hole in it. Disconnect at bottom of tub and check it out. Blowing on it should cause the switch to click and close. Cut off ends and make a good connection to see if it fixes it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water continues to run through my heat pump after it shuts off. What could be wrong? [ 0 Answers ]

We just got a dedicated water line to the heat pump and now the water doesn't shut off when the heat pump does. Any suggestions?

Water continues to run into my washer after cycle stops [ 1 Answers ]

Water continues to run into washer all the time the only way to stop the water is to shut off water completely.Why

Water continues to run from my drip try. I can't see where its coming from. [ 1 Answers ]

I have checked at the geyser and the valves are not leaking but there is water in the drip tray. Could it be that the geyser its self is leaking? There is water running continuosly from my drip tray.

Water continues to run from bath faucet while shower in use [ 4 Answers ]

Hi! I run the water from the tub faucet until it's the correct temp. When I lift the knob to engage the shower head, the shower starts, but quite a bit of water still pours from faucet. Any suggestions for repair would be appreciated. Thanks!

View more questions Search