Ask Experts Questions for FREE Help !
Ask
    digger2728's Avatar
    digger2728 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 27, 2010, 03:35 PM
    Water continues to run into my washer after cycle stops
    Water continues to run into washer all the time the only way to stop the water is to shut off water completely.Why
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Oct 27, 2010, 03:42 PM

    Hot and cold have separate solenoids to open as required. If a Tech was to remove control(coils) wires from Solenoids and water still flows, it is not shutting off. These are normally closed when off, and open the valve when voltage is applied.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water continues to run from my drip try. I can't see where its coming from. [ 1 Answers ]

I have checked at the geyser and the valves are not leaking but there is water in the drip tray. Could it be that the geyser its self is leaking? There is water running continuosly from my drip tray.

Washer machine will not complete entire cycle. It gets to the spin cycle, and stops. [ 1 Answers ]

I have a GE washer, (about 5 years old). The washer goes through the wash and rinse cycles fine. When it gets to the spin cycle, it stops. I can override and manually place the machine on spin. How can I fix this problem so the cycle runs through completely. Thank You

Washer continues to fill and overflows during all cycle [ 2 Answers ]

I have a whirlpool washer model number lsr5232lq0 that continues to fill during all cycles And overflows I can get it to work correct on small load setting. Can anyone tell me what to look for or what part to replace. Thanks in advance Wjc

View more questions Search