Ask Experts Questions for FREE Help !
Ask
    BlackBehr97's Avatar
    BlackBehr97 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 22, 2013, 05:09 AM
    Furnace burners won't light
    I have an old (not sure how old) Bard natural gas furnace.
    Model # C80D36A
    Serial # L900660603
    Pilot light is lit but burners won't light.
    Any suggestions?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Jan 22, 2013, 05:20 PM
    Going to have to check any limits, and the thermostat, and for voltage to the gas valve. Never heard of Bard, so it could be a powerpile problem, who knows. Probably have to call in an onsite tech for this. Should be able to trouble shoot it in a matter of minutes.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshooting Gas Furnace Burners Pilot Light Lit, but Burner Won\ [ 1 Answers ]

Have an old furnace, at least 18 years old, pilot light is lit and stays on, but the burners do not light, installed new thermostat the other day and it fired up right away, but when I turned the heat off two days later that is when this problem happened, what can be the reason?

Carrier Furnace burners won't light [ 0 Answers ]

Ancient furnace burners won't light. Worked fine last year. Replaced thermo-couple (sp?) so at least we got the pilot to light. Carrier model 5868100? Series 121. Found the reset button on top but it doesn't seem like it is sticking up far enough to be legitimate. Is there a particlar series of...

Heil Furnace burners won't light. [ 0 Answers ]

Hi, I have a Heil furnace, propane, in my shop 125,000/100,000 BTU. Looks to be an older furnace but came out of a remodeled house where it was working. 2" PVC exhaust, intakes in building. TStat is newer (used in house) confirmed good, furnace turns on, exhaust fan runs, igniter makes sparking...

York diamond 80 furnace last two burners won't light [ 1 Answers ]

I have a York Diamond 80 furnace. The first two burners light up but the others won't. After about 4-5 seconds the burners turn off but the fan is till running and blowing out cool air.. What do I need to do other than calling someone.. Please help.. Thanks

Burners on Gas Furnace won't light [ 0 Answers ]

All right, I'm at my wit's end and I could use some help... Last week my furnace started blowing cold air. The pilot lights fine, but the burners will not light. My ex-wife's boyfriend's friend came out and looked at it and suggested we replace the furnace, said the heat exchanger/combustion...

View more questions Search