 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kitchen aid dishwasher blinking sani light at end of cycle
This morning, the sani light was blinking and the clean light was a solid green. As far as I know, the cycle wasn't interrupted and the hot water heater is 6 years old, so there should have been plenty of hot water. Any ideas?
Thank you, Agnes |
||||
Check out some similar questions!
I currently have a Kitchen Aid Dishwasher with the rinse only cancel lights blinking with no responses from the touch panel. What I did was recycle the power, tried to put it in diagnostic and no thing happened. Need some help?
I have a kitchen aid Superba washer that is making a grinding noise during spin cycle
The sani dry light on my RCA Whirlpool Quiet Partner III dishwasher blinks when the washing is complete and it doesn't seem to be as hot as usual. Any ideas?
My elderly father-in-law has a very old Kitchen Aid dishwasher that has been used almost daily for over 25 years. It has started making a noice in the motor area, perhaps like worn bearings. This model has replaceable wooden door panels and the newer models don't accommodate the same size panels...
My Kitchen aid dishwasher (which has been horrible from day 1) does not clean the top rack. I can not get the arm under the rack to spin. I have taken it apart and flush it out and it seems to be clean. It connects into the feed tube fine, any help would be great Thanks shulta44
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
