 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Troubleshooting a Intertherm Furnace
My Intertherm furnace will sometimes not blow out warm air. It clicks on and the blower motor runs fine. To get it to heat I turn the two circuit breakers, that are in the furnace, off and then on again, and it will heat. Is there a relay that needs to be replaced?
|
||||
Check out some similar questions!
On the hot serface ignition down by where the wires go in there is a flashing red light coming from I believe the blue wire, and the furnace won't start
1986 intertherm electric furnace<only blowing cool air on heat setting. I inspected the heat coils and they don't look broken
Intertherm model E2EB-015HA Was working fine then overnight it got nice and warm in house and the next morning nothing works.Put new batteries in wall thermo checked all breakers,Went out to heat pump and pushed in on contacter and outside unit comes on.no fan by itself or anything.
I have an intertherm gas furnace.. For some reason the heat portion won't kick on when turned on all gas connections and switches are on that need to be... When I bought the mobile home the original owners said that the heater worked... Any ideas why the pilot light won't kick on its fairly brand...
Furnace will heat up without fan starting. I have to turn fan on at thermostat. Its an electric furnace.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
