 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intertherm Furnace Troubleshooting
Intertherm model E2EB-015HA Was working fine then overnight it got nice and warm in house and the next morning nothing works.Put new batteries in wall thermo checked all breakers,Went out to heat pump and pushed in on contacter and outside unit comes on.no fan by itself or anything.
|
||||
Check out some similar questions!
Having problems with our intertherm lp furnace. It runs for a while and then it kicks out the high limit reset on the purge blower fan. Then we shut the furnace off and reset the high limit switch button on, and it comes on again. We currently have the thermostat set at 67, if we increase the...
On the hot serface ignition down by where the wires go in there is a flashing red light coming from I believe the blue wire, and the furnace won't start
My intertherm oil furnace is putting out an oil smell at different times. Not consistent. Seems to be before it switches on. Had a maintenance guy come and service it and he changed the nozzle, oil filter, and air filters and couldn't see anything wrong. Said it was burning good. Of course it...
I have an intertherm gas furnace.. For some reason the heat portion won't kick on when turned on all gas connections and switches are on that need to be... When I bought the mobile home the original owners said that the heater worked... Any ideas why the pilot light won't kick on its fairly brand...
My intertherm #e2eb-01sha electric furnace mostly just blows cold air. Sometimes however the heat works just fine. Also, anytime the blower is not running the furnace is hot so we have to turn off the safety disconnect. We have tried replacing the thermostat to no avail. Help please Michael
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
