Check out some similar questions!
Intertherm furnace troubleshooting
[ 11 Answers ]
Having problems with our intertherm lp furnace. It runs for a while and then it kicks out the high limit reset on the purge blower fan. Then we shut the furnace off and reset the high limit switch button on, and it comes on again. We currently have the thermostat set at 67, if we increase the...
Troubleshooting a Intertherm Furnace?
[ 2 Answers ]
On the hot serface ignition down by where the wires go in there is a flashing red light coming from I believe the blue wire, and the furnace won't start
Intertherm furnace troubleshooting
[ 2 Answers ]
My intertherm #e2eb-01sha electric furnace mostly just blows cold air. Sometimes however the heat works just fine. Also, anytime the blower is not running the furnace is hot so we have to turn off the safety disconnect. We have tried replacing the thermostat to no avail. Help please Michael
Intertherm furnace troubleshooting?
[ 0 Answers ]
Furnace will heat up without fan starting. I have to turn fan on at thermostat. Its an electric furnace.
Intertherm MAC 2460 troubleshooting
[ 5 Answers ]
I have the above electric furnace and I need some help troubleshooting it. I was able to make the unit work by jumpering a couple of the wires. I know this is not safe but so was freezing and I didn't leave it unattended. I have a meter and I have 240 volts to and out of breakers and to most of... View more questions Search
Add your answer here.
|