 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Weils mclain cgt boiler problems
I have a weils mclean cgt and the three way valve has never worked.I wired the two black wires from the boiler to the zone valves end switch I have continuity it should work,could you please help I lost my other boiler during sandy
|
||||
Check out some similar questions!
Spark ignition gas boiler. Weil McLain gas boiler. The pilot lights but the boiler doesn't start.
I would like to know why Weill McLain does not stand behind their products. We purchased a Ultra 230 Boiler in October 2009 and a Ultra Plus 80 Water Heater at the same time at a cost of $8302.66. Hooked both up and moved into our house in November 2009. The boiler stopped working April 9, 2010,...
I have a Ultra 155 boiler with an indirect 40 gal DWH. 4 zones, plus prioritized domestic water Taco switching relay. The system uses 4 taco cartridge circulators for the four zones plus one for the DWH. It constantly goes off (at least once every other week in the winter) on a too much flow...
I'm looking for a transformer with a circuit breaker to replace a White-Rodgers 90-112 transformer/relay. I can't find the combination with a breaker so I figured I'll buy the transformer and then pop it in in the 4" X 4" backplate since the relay is not used anyway. Will the Honeywell AT150F1022...
I have a boiler that some times just doesn't want to kick on, With out just a little help (a tap from the back of a screw driver will do) It looks like some kind of switch or control or something, it has what Look like points that seem to make and break contact as I tap on this Thing, then...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
