Ask Experts Questions for FREE Help !
Ask
    myroneh1's Avatar
    myroneh1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 4, 2012, 11:39 AM
    Honeywell thermostat temperature and time programming?
    On model # RTH2310, I can't match programmed temp. and time with the clock time. My bedtime setting shows up at the afternoon time. Thanks.

Check out some similar questions!

New Honeywell CT87K Thermostat Not Reading Room Temperature [ 1 Answers ]

I recently purchased a new Honeywell CT87K Thermostat for a gas heat furnace. The temp on the thermostat never goes below 72 degrees. I used an ordinary room thermometer and the temperature was reading 55 degrees, but the stat read 72. I had to turn the stat up to 80 degrees just to get the furnace...

Honeywell thermostat rth230b A/C will not shut off auto desired temperature! [ 1 Answers ]

I have a Honeywell thermostat RTH230B and this issue just came up today with the air conditioning not shutting off after it has reached my desired setting. The a/c continues to run and will never shut off, I have tried to delete all programs, I just want it to keep my desired temp plus or minus 2...

Increase AC thermostat cycle time Honeywell CT3200 [ 1 Answers ]

I have CT3200 and I notice that the AC compressor only runs for 8 minutes then shuts off. For better efficiency the compressor should run longer. Is there any way to increase the length of the ON cycle for the AC? I already have the CT3200 set for a high efficiency (>90%) furnace.

Programming a Honeywell Vision Pro Commercial Thermostat [ 1 Answers ]

Our small community library installed a Honeywell TB8220 Commercial VisionPRO Programmable Thermostat last summer and the installer programmed it with no coaching to the volunteers who try to keep the library going. He is extremely busy plus we are trying hard to avoid the $75 per hour charge. We...

Programming Honeywell VisionPRO TH8000 thermostat [ 1 Answers ]

How do I go about entering the temperature for my backup heat source (in my case, gas) to kick in? I believe it was set at 35 degrees, but I want to confirm. Thank you

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.