Ask Experts Questions for FREE Help !
Ask
    TRM1958's Avatar
    TRM1958 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 16, 2010, 07:20 PM
    Increase AC thermostat cycle time Honeywell CT3200
    I have CT3200 and I notice that the AC compressor only runs for 8 minutes then shuts off. For better efficiency the compressor should run longer. Is there any way to increase the length of the ON cycle for the AC?

    I already have the CT3200 set for a high efficiency (>90%) furnace.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 16, 2010, 09:05 PM

    The A/cight run short times if it is oversized but as long as it is removing enough moisture that is all that counts.

    Here is your manual if you want to read it to see if the A/C is adjustable.

    http://customer.honeywell.com/techli...0s/69-0653.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell CT3200 - fan continuously running [ 2 Answers ]

I just noticed that regardless of whether the FAN switch is in the AUTO or ON position, the fan is continuously running. It just started to do this, this past week, up until now it was fine, only running when the furnace kicked in. When I turn the SYSTEM switch from HEAT or COOL to OFF, it...

Honeywell MagicStat 32 - Model CT3200 [ 9 Answers ]

Hi, I have a Honeywell Thermostat MagicStat/32 which is saying (not Flashing) "bat low." As per the instruction manual, I changed the Batteries. This did not clear the screen. I tried another set of new Batteries, which again did not clear the screen. I am sure I put them In correctly. ...

Honeywell Magicstat 32 Model CT3200 [ 4 Answers ]

Help: The reading on my CT3200 is higher from the room temperature by at least 2 degrees Celsius during the heating season. I measured the temperature with a digital thermometer which read 20 degrees Celsius and my CT3200 was reading 22 degrees Celsius. It's on an inside wall which is well...

Honeywell MagicStat 32 - Model CT3200 [ 2 Answers ]

Hi, I have a Honeywell Thermostat MagicStat/32 which is saying (not Flashing) "bat low." As per the instruction manual, I changed the Batteries. This did not clear the screen. I tried another set of new Batteries, which again did not clear the screen. I am sure I put them In correctly. ...

Honeywell CT3200 for Fireplace [ 1 Answers ]

I've replaced the CT3200 that came with the house with a newer thermostate. Now the simple spring thermostat from the gas fireplace just quit. Can I use the 3200 to simply turn the fireplace on and of at a given time? There is only a black and white wire coming out of the wall and W Y G and R...

View more questions Search