Ask Experts Questions for FREE Help !
Ask
    BruJan's Avatar
    BruJan Posts: 38, Reputation: 1
    Junior Member
     
    #1

    Jan 20, 2008, 12:11 PM
    Programming a Honeywell Vision Pro Commercial Thermostat
    Our small community library installed a Honeywell TB8220 Commercial VisionPRO Programmable Thermostat last summer and the installer programmed it with no coaching to the volunteers who try to keep the library going. He is extremely busy plus we are trying hard to avoid the $75 per hour charge. We have contacted Honeywell and they did send a more extensive owners manual. Is there anyone out there who can give an understandable overview of how to program and also how to understand exactly what the code numbers are?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 20, 2008, 04:06 PM
    Here is a list of links that may help.

    http://customer.honeywell.com/techli...it/62-3070.pdf


    http://customer.honeywell.com/techli...it/62-3071.pdf

    Sorry to say but a step by step set up using this type of communication would take hours. The above manuals especially the second link are done in plain english and can be understood by every day people.

    You were sold a thermostat that you did not need with way to many features. A simpler programmable thermostat would have been a better choice for your situation and much more user friendly.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Honeywell Vision Pro 8000 TH8320 wiring [ 8 Answers ]

Hello, I have a 2-stage heat, one stage cool heat pump. I am trying to wire this thermostat but it is not working. I called a professional and she told me to wire it as follows, but the heat will never kick on no matter how long I wait. Left Side Heat Pump Y2-No wire L-No wire E-No wire...

Honeywell RTH230B programming [ 1 Answers ]

We have purchased the Honeywell RTH230B 5-2 day programmable thermostat and installed it. How do I get the "phase" or period of day icon to display? If one manually changes the tempature setting while in a particular phase, will the program revert back to the program schedule when the time...

Programming Honeywell VisionPRO TH8000 thermostat [ 1 Answers ]

How do I go about entering the temperature for my backup heat source (in my case, gas) to kick in? I believe it was set at 35 degrees, but I want to confirm. Thank you

Honeywell RTH 230 B programming [ 1 Answers ]

Our thermostat has capability to program for 4 "zones" or times. We have cleared zones 2, 3, & 4 and only wish to use zone 1 for A/C. When reducing the temperature setting in zone 1 below the actual temperature in an effort to get the A/C to kick in, the thermostat will revert to Zone 4 (by...


View more questions Search