Ask Experts Questions for FREE Help !
Ask
    mz portia's Avatar
    mz portia Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 12, 2012, 01:55 PM
    Should a ground be tapped or spliced
    First exam of semester
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #2

    Nov 12, 2012, 02:21 PM
    Forgive my silly question, but is a homework or lab work question.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #3

    Nov 12, 2012, 02:23 PM
    If you studied your book you would know the answer.

    Chuck
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
     
    #4

    Nov 14, 2012, 06:01 AM
    The answer to this and many other poignant questions can be found in the electrical code article 250...
    One of the more important parts of the code!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Abs coupling tapped [ 1 Answers ]

Is the tapped glue coupling called a c/o body?

GFCI Trips with newly spliced fountain pump [ 5 Answers ]

I am nearly exasperated trying to splice in a new fountain pump. Here's what I did: 1. bought a new pump (190gpm), cut the cord near its plug 2. threaded the power cord through the bottom of the fountain "tub" 3. spliced it to the power cord which runs under the rock patio to the gfci outlet....

#4 Grounding wire 200 amp service spliced? [ 4 Answers ]

Upgrade my 100 amp panel to a 200 amp panel. I ran a #4 ground to the copper water pipe in the basement. The ground wire was accidentally cut. Can the ground wire be spliced?

2008 Expedition driver's window cable broke. Can be spliced? [ 0 Answers ]

Less than two years old. This should not have happened. Kept in top condition by a perfectionist. (To minimize scratching the window, I don't raise and lower it much.) Ford wants $218 for a whole new window system. Everything inside the door looks fine and clean and "like new". Apparently...

How can I re-ground a circuit with a spliced metal-clad cable? [ 2 Answers ]

Hi, Folks! I've posted on here before about an open ground, so don't mean to be a bore - but this is another issue. Sorry for the long preamble I'm about to give, but thought some background might help before my question: I recently installed a GFI combination outlet / switch (to a vanity...


View more questions Search