Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing glued ABS fitting to ABS piping
[ 5 Answers ]
I glued an ABS toilet flange to ab ABS pipe roughing. The fitting did not go down all the way and is 1/2" proud of the tile flooring. I now want to remove the fitting and replace with a new fitting. How do I do it without damaging the receiving pipe. Pipe is in concrete floor. Thanks, Bob
Is a PVC coupling for DWV the same as a PVC coupling for water?
[ 4 Answers ]
Is a PVC Drain Waste and Vent (DWV) coupling the same as a coupling for PVC water pipe?
Fernco neoprene coupling to connect two PVC pipes instead of a pvc repair coupling?
[ 3 Answers ]
Hi, A plumber was replacing some plumbing in our shower area. He connected two 2" PVC pipes that ran directly into each other with a Fernco Neoprene Coupling. In another place, he connected two 3" PVC pipes that ran directly into each other with a second Fernco Neoprene Coupling. In both cases...
Flexible coupling vs. No-hub coupling
[ 3 Answers ]
I have to add a sanitary tee fitting to a PVC 3" vertical waste stack. I haven't cut into the pipe yet, but I'm reasonably certain that I'm not going to have enough slack or play in the either end of the pipe to work in a PVC fitting and cement it. From reading this forum it sounds like a no-hub...
Repair coupling and rigester coupling
[ 4 Answers ]
What is the deffernce between the repair coupling and the rigester coupling in PVC fittings? I knew the deffrence in shape and that the first is used in small places wher you add or fix an exsisting line, and the last one is always used in first fixing and installatin. But can I always use the... View more questions Search
|