Ask Experts Questions for FREE Help !
Ask
    grumpy32's Avatar
    grumpy32 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 23, 2012, 09:10 AM
    Furance will not shut off
    We have a majic chef g66-150-1 furnace with a manufacturing date of 1978. We replaced the thermocoupler last year and when we turned on the furnace this year it will not shut down. It ran for over 2 hrs the other night and I had to shut the thermostat down all the way then it took about 5 minutes to shut off.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Sep 23, 2012, 01:30 PM
    Is the main burner on the whole time or is it just the fan?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I repair my shut off nozzle it broke at the neck of the shut off connector? [ 1 Answers ]

I was replacing my washer with a new one. While trying to disconnect the water hose it broke at the neck . Which was a PVC pipe I had to find something to clog the pipe to stop the water from going every where.

Furance locks out [ 1 Answers ]

I have a luxaire 92% efficient multi stage variable speed furnace. It's at a cottage and it one year old. The furnace shuts off (locks out) and will not restart until I turn the system off/on and then it will immediately start up and work again. I may run for a week or two or even a month. What is...

My delta univcersal trim kit doesn't,t shut off ,how do I install it to shut off [ 1 Answers ]

I installed a delta universal trim kit#10003/10004and the knob will not shut off the water. Is there a way that I have to position the guts inside the wall?

Old Furance [ 1 Answers ]

I have a house which was built in the early 1950's. It had one of those back to back floor furnaces in the hallway and living room, I would like to get rid of it but its to costly, is there a way I can clean it out because its making my kids and I sick every time we turn it on and not to mention...

Furance cut in / out too much [ 1 Answers ]

I have a bryant furance, we moved in a couple of weeks now. The furanace cycles in and out too much, from start up to shut down it last 9mins. Any Ideas what it might be. Thanks.

View more questions Search