Ask Experts Questions for FREE Help !
Ask
    goodguy654's Avatar
    goodguy654 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 8, 2011, 02:11 PM
    Furance locks out
    I have a luxaire 92% efficient multi stage variable speed furnace. It's at a cottage and it one year old. The furnace shuts off (locks out) and will not restart until I turn the system off/on and then it will immediately start up and work again. I may run for a week or two or even a month. What is the issue? I have replced the mother board but it still does the same thing.
    repairman_red's Avatar
    repairman_red Posts: 37, Reputation: 1
    Junior Member
    		  
    #2

    Mar 25, 2011, 10:39 AM
    Check to make certain that the vent has a good slope back to the furnace at all locations. Then make sure that it has good drainage. Those are the two biggest culprits for that problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Old Furance [ 1 Answers ]

I have a house which was built in the early 1950's. It had one of those back to back floor furnaces in the hallway and living room, I would like to get rid of it but its to costly, is there a way I can clean it out because its making my kids and I sick every time we turn it on and not to mention...

Chirping furance [ 1 Answers ]

We have a gas furnace, after the furance shuts off, the fan will run for approx. five more minutes, then that will shut off. Approx. four or five more minutes later we will hear a chirp come from the furance area. We have had the blower check out. Furance company says it is the cooling of the...

Furance closet [ 1 Answers ]

I would like to build a closet for my furance. What are the dimensions around the furance?

Colman furance [ 4 Answers ]

My colman furnace runs short cycle on and off every 2min replaced double stacks new thermostat still same way. How do I fix this problem

Furance cut in / out too much [ 1 Answers ]

I have a bryant furance, we moved in a couple of weeks now. The furanace cycles in and out too much, from start up to shut down it last 9mins. Any Ideas what it might be. Thanks.

View more questions Search