Ask Experts Questions for FREE Help !
Ask
    ga1021's Avatar
    ga1021 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 30, 2012, 01:57 PM
    Thermostat to inducer fan
    Heil gas fired furnace. Inducer fan will not start. (no power) when I suck on the pressure switch tube it starts right up. The power supply from the inducer connects to the gas valve. I have power coming in to the gas valve from the circuit board. Question? Can the other wires from the circuit board stop the gas valve from letting power continue to the inducer fan? What would the problem be?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Aug 30, 2012, 03:56 PM
    If this is a newer Heil, I believe they use the "smart" valve. If this is the case, you will need to get a qualified tech in there to determine the problem. What they call a smart valve, is one of the dumbest things out there in my opinion. Trouble shooting them suckers can be a real pain. Good luck and please let us know what the tech finds.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Inducer fan blade [ 1 Answers ]

The inducer fan blade is broke furance is a bryant plus 90 cannot get part on a Sunday.can I reinstall motor without blade and run furance

Cooling Fan for Inducer Motor [ 1 Answers ]

The cooling fan for my furnaces inducer motor broke off when the HVAC guy was working on it. He said the part cannot be purchased individually, but the whole motor must be replaced for $400. Is this legit? It looks as though the plastic connection on the fan wheel broke and could be glued on. ...

Hot inducer fan... [ 0 Answers ]

I have a Coleman high efficiency furnace (5 yrs old.) that has ran well until this winter. My first problem was that the furnace indicated that the limit switch was open. I took it out, cleaned it, and then tested it (works). I put it back in and the furnace worked well for a couple of days. Then...

Cooling fan for inducer motor [ 1 Answers ]

I've been told the inducer motor on my Goodman furnace has burned out because 'the cooling fan is missing". Does anyone know if this is a legit diagnosis? I didn't even know there was a cooling fan for the inducer motor on furnaces.

Looking for a draft inducer fan #621080 Anybody? [ 2 Answers ]

I'm looking for a draft inducing fan, part #621080. Any help would be great [email protected]

View more questions Search