Ask Experts Questions for FREE Help !
Ask
    baddawgz's Avatar
    baddawgz Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 24, 2012, 09:40 AM
    still need a schematic for kenmore fridge PC board 2252199
    still need a schematic for kenmore 10655532400 part # 2252199 or better pic of resisters at r 41 and r 39 position to determine values
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Aug 24, 2012, 11:50 AM
    Suggest you go through Sears parts for that .
    littlewoods0's Avatar
    littlewoods0 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Mar 23, 2013, 01:32 PM
    I have one I bought for my fridge to hopefully fix an issue with over icing, it wasn't what I needed so have it for sale $25
    Email [email protected]
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Fridge - Freezing bottom half of the fridge [ 1 Answers ]

I have a side-by-side refrigerator. The freezer is working fine, but the refrigerator side, the fridge is freezing bottom half. Recently fridge was not working at all, so the service guy came and replaced the fan, after that the freezer is OK, but the refrigerator is freezing the bottom half. ...

Schematic for kenmore part # 2252199 [ 1 Answers ]

need a schematic for kenmore Model # 10655532400 main PC board part # 2252199 or values for two resisters position r 41 and r 39 that are too fried to read value code

Nordyne furnace control board 624631a schematic [ 0 Answers ]

I need a schematic for the nordyne 624631a circuit board

I replaced the main board on a ge arctica fridge, but it still doesn't cool. [ 0 Answers ]

I have a ge arctica refrigerator, one day I came home and there was water on the floor. My freezer temp was at 22 degrees. I unplugged the fridge and plugged it back in and it reset the fridge to normal temps. I called a service man he said my main board was bad. I put a new main board and now it...

View more questions Search