Ask Experts Questions for FREE Help !
Ask
    louchama's Avatar
    louchama Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 18, 2012, 11:38 AM
    Hampton bay ceiling fan
    Inside the fan there's a small black box with two (2) wires. A yellow wire goes to the pull chain switch and the a blue wire that came loose and don't know were it goes?
    AnswerMan5000's Avatar
    AnswerMan5000 Posts: 186, Reputation: 3
    Junior Member
     
    #2

    Aug 21, 2012, 08:29 AM
    Try this article on ceiling fan wiring.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Ceiling Fan - Fan OK, Lights Dim if turned on after fan [ 3 Answers ]

Installed a Hampton Bay 52" ceiling fan with light powered by remote unit. Fan works perfectly with remote. Lights work perfectly if you turn them on before the fan. However, if you turn the fan on first, then the lights, the lights will only come on dim. Ive checked and rechecked connections-...

Hampton Bay Ceiling Fan And Hampton Bay Remote Compatibility [ 1 Answers ]

I purchased a Hampton Bay ceiling. It's Model is 5104 (Lyndhurst 52" ) and a Hampton BAy Remote, Model #70830. My question is: Is this remote compatible with the fan?

I have a Hampton Bay ceiling fan for about 15 years. The lights work but the fan doe [ 3 Answers ]

I have a Hampton Bay with a light. The light works but the fan does not. I can feel a slight hum of the motor and sometimes it appears the blades may move a bit but really there is nothing. It is about 15 yrs old. I have another one like this, same age and it works fine. Before I start taking...

Taking a Hampton Bay Ceiling Fan off the ceiling [ 2 Answers ]

Can you tell me how to remove my ceiling fan off the ceiling. I don't know how to get the cone-shaped piece that is touching the ceiling off. Thank you.

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?


View more questions Search