 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
The power vent on the furnace is over heating is there some way to test the motor or check it out?
I had my heat on and I wanted to rise the temputure when I did the heater kick on and it started blowing cold air and know I can not get it to go off without turning the power off and then when I turn the power back on it start running again is there a reset botton some where on it
I have a Hiel DC90 ultra efficiency furnace. It has been sitting all summer, and I tried starting it up today. So I turned the thermostat on raised the temperature, the furnace starts up I hear the first click, then I hear the second click, then the pilot ignite's, the inside of the burner box...
Have a Heil high efficiency furnace which works fine with heat and ac, but the fan will not go when thermostat is set to the on position and heat/air are off... is the a furnace problem or a thermostat problem??
The fan runs all the time but the unit never lights or heats. Where are the limit swithches that might need to be re-set?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
