Ask Experts Questions for FREE Help !
Ask
    nrd's Avatar
    nrd Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 5, 2012, 09:46 AM
    Electric clutch on john deere 145
    I was cutting grass on my John Deere 145 when it just quit. I looked underneath and the wires going to the cluch where riped off. The fuse was blown too. I changed the fuse and it starts but what made the wires rip off?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 12, 2012, 08:42 PM
    Hi,
    Sometimes it has to do with the stay on the left side(wires are on the right.) It should be vertical and the clutch should move slightly in it. Sometimes it is the wires were badly routed or something got pulled into them by the belt. Usually it does not break them off flush with the clutch and they can be repaired. If flush then I am afraid it means a clutch.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere Lawn Tractor 145 PTO Clutch [ 0 Answers ]

I have a John Deere 145 Serial Number GX0145A016096 Engine Number 051209YG15224 Date of Manufacture 22 Dec 2005 I was mowing the mower suddenly stopped. At first, I found a dead fuse. After changing the fuse, the starter would not crank the engine. The only noise was a "clank". I could not turn...

John Deere model 145 runs perfect until I engage blade switch .blows fuse put in new [ 1 Answers ]

Runs perfect until I engage blade switch .blows fuse put in new switch dose same thing Blows fuse John Deere model 145

John deere 145 clutch will not engage [ 4 Answers ]

View more questions Search